Tag Archives: signs of a broken water heater

Steps to Take When Your Water Heater Fails in Chicago

Steps to Take When Your Water Heater Fails in Chicago

When your water heater fails in Chicago, it can be a significant inconvenience, especially during the chilly winter months. Quick action is essential to minimize discomfort and potential damage. Here we outline the immediate steps to take, common repair solutions, and when to contact a professional plumber for assistance.

Recognizing the Signs of Water Heater Failure

Before we get into the steps to take when your water heater fails, it’s important to recognize the signs of a failing unit. Some common indicators include:

  • No hot water or inconsistent water temperature
  • Strange noises coming from the water heater
  • Discolored or rusty water
  • Water leakage around the unit
  • Unusual smells

Being aware of these signs can help you address the issue promptly and avoid further complications.

Immediate Steps to Take When Your Water Heater Fails

When you realize your water heater has failed, it’s crucial to take immediate action to mitigate any potential damage and ensure your safety. Follow these steps:

Turn Off the Power Supply to Your Water Heater

The first step is to turn off the power supply to the water heater. For electric water heaters, locate the circuit breaker and switch it off. For gas water heaters, turn the gas valve to the “off” position. This will prevent any further damage and reduce the risk of accidents.

Shut Off the Water Supply to Prevent Flooding

Next, shut off the water supply to the water heater. Locate the cold water shut-off valve, usually found at the top of the unit, and turn it clockwise to stop the flow of water. This will help prevent any potential flooding or water damage.

Drain the Water Heater to Avoid Water Damage

Draining the water heater is an essential step to avoid water damage and make any necessary repairs easier. Attach a garden hose to the drain valve at the bottom of the unit and direct the other end to a safe drainage area. Open the valve and allow the water to drain completely. Be cautious, as the water may be hot.

Assessing the Problem with Your Water Heater

Once you have taken the immediate steps to secure your water heater, it’s time to assess the problem. Understanding the root cause of the failure will help you determine the appropriate course of action.

Check for Visible Damage on the Water Heater

Inspect the water heater for any visible signs of damage, such as leaks, corrosion, or broken components. This can give you a better idea of what might be causing the issue and whether it’s something you can fix on your own or if you need professional assistance.

Test the Thermostat and Heating Elements for Faults

If you have an electric water heater, the thermostat and heating elements could be the culprits. Use a multimeter to test the thermostat and heating elements for continuity. If either component is faulty, it may need to be replaced.

Examine the Pilot Light and Gas Supply for Gas Water Heaters

For gas water heaters, check the pilot light and gas supply. If the pilot light is out, try relighting it according to the manufacturer’s instructions. If the pilot light won’t stay lit, there may be an issue with the thermocouple or gas supply.

a broken water heater that needs repair.

Attempting to fix a complicated issue on your own can lead to further damage and costly repairs.

Common Repair Solutions for Water Heaters

Depending on the severity of the problem, there are several common repair solutions you can try before calling a professional plumber.

Replacing the Heating Elements in Electric Water Heaters

If your electric water heater’s heating elements are faulty, you can replace them with new ones. Turn off the power supply, drain the water heater, and remove the access panels. Disconnect the wires from the heating elements and use a wrench to remove them. Install the new elements, reconnect the wires, and reassemble the unit.

Flushing the Tank to Remove Sediment Build-Up

Over time, sediment can build up in the water heater tank, reducing its efficiency and causing issues. Flushing the tank can help remove this sediment. Turn off the power supply, shut off the water supply, and drain the tank. Once the tank is empty, open the cold water supply valve to flush out any remaining sediment. Close the drain valve and refill the tank.

Replacing the Thermostat for Consistent Water Temperatures

If the thermostat is faulty, it can cause inconsistent water temperatures or no hot water at all. To replace the thermostat, turn off the power supply, remove the access panels, and disconnect the wires from the old thermostat. Install the new thermostat, reconnect the wires, and reassemble the unit.

When to Contact a Local Plumber for Water Heater Issues

While some water heater issues can be resolved with DIY repairs, there are situations where it’s best to contact a local plumber for assistance.

Complex Repairs That Require Professional Expertise

If the problem with your water heater is complex or beyond your skill level, it’s best to call a professional. Attempting to fix a complicated issue on your own can lead to further damage and costly repairs.

Frequent Breakdowns Indicating a Deeper Issue

If your water heater is experiencing frequent breakdowns, it may be time to call a professional. They can assess the unit and determine if it needs to be repaired or replaced.

Age of the Water Heater and Its Impact on Performance

Water heaters typically have a lifespan of 10-15 years. If your unit is nearing the end of its life, a professional plumber can help you decide whether it’s more cost-effective to repair or replace the water heater.

Preventative Maintenance Tips for Your Water Heater

Regular maintenance can help extend the life of your water heater and prevent future issues. Here are some preventative maintenance tips to keep your unit running smoothly:

Inspect the Anode Rod to Prevent Corrosion

The anode rod helps prevent corrosion inside the water heater tank. Inspect the rod annually and replace it if it’s heavily corroded or worn out.

Flush the Tank Annually to Maintain Efficiency

Flushing the tank annually can help remove sediment buildup and improve the efficiency of your water heater. Follow the same steps outlined in the “Flushing the Tank” section above. For a detailed explanation on how to drain and flush your water heater, see this article.

Check the Pressure Relief Valve for Proper Functioning

The pressure relief valve is a safety feature that releases excess pressure from the tank. Test the valve annually by lifting the lever and allowing some water to discharge. If the valve is not functioning properly, replace it.

Insulate the Tank and Pipes to Improve Energy Efficiency

Insulating the water heater tank and pipes can help improve energy efficiency and reduce heat loss. Use insulating blankets and pipe insulation to cover the tank and pipes.

Wrapping It Up

When your water heater fails in Chicago, taking immediate action is crucial to minimize discomfort and potential damage. By following the steps outlined in this article, you can address the issue promptly and determine whether a DIY repair or professional assistance is needed. Regular maintenance can also help extend the life of your water heater and prevent future problems. Stay proactive and ensure your water heater remains in good working condition to enjoy consistent hot water throughout the year.