Tag Archives: how to clean my sump pump

Spring Cleaning for Your Sump Pump: Inspecting and Maintaining Your System

Spring Cleaning for Your Sump Pump

As the winter snow melts and the spring rains begin to fall, it’s important to ensure that your sump pump is in good working condition to protect your basement from flooding. Here we will cover the key steps and tips to keep your sump pump functioning optimally.

Why Spring Cleaning for Your Sump Pump is Essential

Spring is the ideal time to inspect and maintain your sump pump system for several reasons. The increased rainfall during this season can put your basement at a higher risk of flooding. By ensuring that your sump pump is in good condition, you can avoid costly water damage and prevent potential health hazards such as mold growth.

The Importance of Regular Inspections

An essential part of maintaining your sump pump system is conducting regular inspections. Here are a few reasons why regular inspections are important:

  • Identify and address any potential issues early on.
  • Ensure that all components are functioning correctly.
  • Prolong the lifespan of your sump pump.

Regular inspections will help you catch any problems before they escalate into significant issues, saving you time, money, and stress in the long run.

Step-by-Step Guide to Inspecting and Maintaining Your Sump Pump

Step 1: Safety First

Before you begin inspecting and maintaining your sump pump, it’s important to prioritize safety. Make sure to follow these safety guidelines:

  • Disconnect the sump pump from its power source to avoid accidental electrical shocks.
  • Wear protective gloves to avoid any potential bacteria or contaminants.

Step 2: Exterior Inspection

Start by performing an exterior inspection of your sump pump system. Here’s what you should check:

  • Inspect the discharge pipe for any clogs or obstructions.
  • Ensure that the pipe is securely connected and directed away from your foundation.
  • Check the vent hole on the discharge pipe for any blockages.

Step 3: Interior Inspection

Once you’ve completed the exterior inspection, move on to the interior inspection. Follow these steps:

  • Remove the sump pump cover to access the pit.
  • Inspect the pit for any debris or sediment buildup.
  • Check the float switch to ensure it moves freely and isn’t obstructed.
  • Verify that the check valve is working correctly and allowing water to flow in one direction.
  • Clean or replace the sump pump if necessary, following the manufacturer’s instructions.

Step 4: Test the Sump Pump

After completing the inspections, it’s time to test your sump pump system. Here’s how:

  • Pour a bucket of water into the sump pit to activate the pump.
  • Observe the pump’s operation, ensuring that it starts promptly and efficiently removes the water.
  • Listen for any unusual noises or vibrations that may indicate a problem.

Step 5: Consider a Backup Sump Pump System

To provide additional protection against basement flooding, consider installing a backup sump pump system. These systems are designed to support your primary pump in case of power outages or mechanical failures. Options include battery-powered pumps, water-powered pumps, or generator-powered pumps.

a sump pump backup system in place.

To provide additional protection against basement flooding, consider installing a backup sump pump system.

Tips for Maintaining Your Sump Pump System

While spring is an excellent time to thoroughly inspect your sump pump system, regular maintenance throughout the year will help keep it in optimal condition. Here are some additional tips:

  • Test your sump pump system every few months by pouring water into the pit.
  • Ensure that the float switch moves freely and isn’t obstructed.
  • Check the power cord and plug for any signs of damage.
  • Keep the pit clear of debris and sediment.
  • Consider installing a sump pump alarm to alert you in case of pump failure or high water levels.
  • Know the location of your main water shut-off valve in case of emergencies.
  • Follow the manufacturer’s maintenance recommendations.

Spring cleaning for your sump pump is an essential task to protect your basement from potential flooding. By following the steps outlined in this article and conducting regular inspections and maintenance, you can ensure that your sump pump system operates efficiently and effectively. Remember to prioritize safety, and if you encounter any issues beyond your expertise, don’t hesitate to contact a professional plumber for assistance. With proper care, your sump pump will continue to safeguard your home for years to come.

How to Clean Your Sump Pump

How to Clean Your Sump Pump

Having a basement or crawlspace in your home has numerous benefits. However, your basement may be prone to flooding or wetness. Natural water can migrate from the soil into your basement, or water may flood your basement from the drain.

Studies from the American society of home inspectors show that over 60% of properties experience moisture in their basements. A wet basement has several setbacks. It may:

But that should not stop you from owning a property that has a basement. That is because sump pumps help prevent your basement from flooding. They send water from your basement into a dry well, municipal storm drain, or other places where it wouldn’t harm your property.

The sump pump may have a pressure sensor or float activator arm if it is automatic. In that case, it will turn on automatically to evacuate water from your basement. If situations demand, you can activate the automatic sump pump manually.

Sump pumps require regular cleaning and maintenance because of their benefits. We recommend that you clean your sump pump and sump pit at least once a year. Remove the sump pump and wash it. Use that opportunity to inspect your sump pit for debris and water. Clear the check valve and conduct other regular sump pump maintenance. 

If you are wondering how to clean your sump pump, follow the tips below.

Things you will need for sump pump cleaning

You will need specific tools that will aid in cleaning your sub pump. They include:

  • A garden hose
  • A wet/dry rag
  • A tarp or plastic sheeting
  • A large bucket
  • A plastic scraper
  • Protective gloves

Precautions

Below are certain precautions you should take before cleaning the sump pump:

  • Ensure that it is not raining when you are performing the cleaning.
  • Water should not be flowing into the sump basin from appliances connected to it.
  • Wear protective gloves during the cleaning.

Steps on cleaning the sump pump

Disconnect and unplug the sump pump

Before cleaning the sump pump, you need to unplug it and turn off the power supply on the circuit breaker. Also, disconnect the sump pump from the discharge pipe. Sometimes, you may use a screwdriver to loosen the sleeve and pull it from the pipe.

Remove the pump from the basin

After disconnecting the sump pump, allow it to drain into the pit. When it is no longer dripping, put it into a bucket or cover it with a plastic tarp or sheeting to prevent spills and take it outside for the cleaning.

Clean the sump pump

With the help of a garden hose, rinse off the dirt from the sump pump. Inspect for grime and use a plastic scraper to scrape off the dirt. Clean the outer surface of the pump using a rag. Spray water on the pump again with a garden hose and leave it to dry.

Drain the check valve

Disassemble the check valve, rinse, dry, and reassemble it. Ensure that your bucket is nearby when draining the check valve. 

Drain the sump pit

If there is any standing water in your sump pit, drain it. You can do this with a bucket or wet-dry vacuum. Clean the basin and remove any gravel, stone, or dirt. Doing this will prevent the risk of sump pump clogging or failure.

Clean the grate

It is essential to clean the grate if you have it in your sump pit. Remove the grate from the sump pump basin. Rinse it using a garden hose and wipe it off with a rag.

Clean the sump pump basin

With the help of a scraper and rag, clean the walls of your sump pump basin. Remove all dirt and grime. Ensure that nothing is clogging the drain holes. When your sump pump pit is clean, you will not notice any terrible smell.

Replace the sump pump

After cleaning and drying the sump pump, you can put it back. Ensure that the pump is at the appropriate level and position to enable its function. Check to ensure that the float arm can move freely without touching the basin walls.

Reconnect the pump

Reconnect your sump pump to the discharge pipe and tighten the sleeve. Ensure that there will be no leakage. However, avoid over-tightening it. Plug it back into the power supply and turn on the breaker.

Test the pump

This step is necessary to ensure that everything is functional after the cleaning. To do this, pour water into the basin until the sump pump activates. Inspect the sump pump as it is running to see if there is any fault.

The bottom line

Your sump pump also requires regular monthly maintenance aside from the annual cleaning. The monthly inspection and maintenance will ensure that your pump is functional whenever the need arises. If your pump fails, invite a local plumber to assess and advise accordingly.